The new 3 HEPA filtered cytotoxic and biosafety class II cabinet is available in two different sizes - 1400mm wide and 2000mm wide. The system has been based on the popular and well reputed BioULTRA Class II cabinet.

The addition of a third H14 HEPA pre-filtration stage right below the work bench ensures the CytoULTRA is perfect for the manipulation of hazardous substances like the preparation of cytotoxic medicines. It is also ideal as a class II cabinet for reinforced biosafety.

         

Minimised and confined contaminated space. All the space after the V Hepa pre-filters H14 is sterile allowing an easy maintenance and extending the life of the downflow and exhaust filters throughout the entire lifecycle.

CytoULTRA is certified by TUV according to both European Standard EN 12469-2000 (class II cabinet) and DIN 12980-2005 (specific to cytotoxic cabinets).

• Only the third stage filters are exposed to contaminants and to dust which may require their replacement when clogged. Accessible from the chamber, they are safely removable even without a full cabinet fumigation process.
• V shaped Hepa pre-filters are safe as they fully contain potential contaminants, easily sealed and inserted in trash bag in the chamber, while running in sterile conditions.
• Adjustable feet to adapt floor unevenness.
• The space below the cabinet has been maximised for the operator comfort and allows all working positions.
• A motorised sliding window with a pneumatic gasket (patented) automatically seals the front window and allows to fully isolate the chamber in case of accident or for fumigation purposes.

 

Full Control Over Expectations

   

• Key for turbo exhaust function and menus.
• Four “function” keys allow choosing the options in the different menus.
• Half speed downflow function (interlocked with the light).
• Large graphic LCD screen with comprehensive display of parameters.
• Status LED for: fan, light, UV light, gas valve and socket.
• Two level password protection (operator and service) replaces keyswitch to prevent non authorised use or service.
• Multilingual menu: English, Spanish, German, French.
• Maintenance menu: UV light timer, decontamination process, alarm report, maintenance history, components run time.
• Setup menu: to change or deactivate the password, lock the controls and get the emergency code.
• Dry contact to be used for remote alarm monitoring or connection to BMS.
• Audible and visual alarms with display of alarm conditions: High or low laminar downflow.
• Low inflow velocity/exhaust flow rate. Front window out of working position.
• UV light on (interlocked with close window position).
• Standby downflow.
• Failure on main control system.
• Fan failure (dual fan safety system).